Rental Platform Disc Brake Lock Smart IPX7 Waterproof Scooter Brake Lock
| Model: | DSS1736 | Application Focus: | Rental Platform Rear-Wheel Security |
| Target Vehicle Type: | Rental E-Bikes / Shared E-Bikes / Rear-Wheel Disc Brake Fleet Vehicles | Rear-Wheel Security Value: | Concealed Rear Disc Brake Lock For Rental Platform Anti-Theft Control |
| High-Torque Positioning: | DSS1736 Direction For Stronger Rear-Wheel Anti-Tamper Security | Disc Interface Value: | 6-Bolt Disc Brake Interface, Brake Parts Not Included |
| Speed Sensing Value: | 3-Magnet Evenly Distributed Speed Sensing For Vehicle-Side Lock Logic | Smart Control Interface: | UART / RS485 / CAN With Main Controller, IoT Or Battery-Side Power Source |
| High Light: | disc brake lock smart,rental platform disc brake lock,smart scooter brake lock |
||
The Smart Rear Disc Lock is designed for rental e-bike platforms, shared e-bike fleets and OEM rear-wheel disc brake vehicles that need stronger concealed anti-theft protection. Using DSS1736 as the reference model, this product direction focuses on rear-wheel security for rental platforms with disc brake layouts.
Rental e-bikes operate in public environments where rear-wheel security, service durability and connected lock control are important. DSS1736 is installed around the rear left dropout and disc brake area, helping vehicle brands add smart lock control without treating the lock as a hub, axle or external frame accessory.
The lock works with the main controller, IoT module or battery-side system for vehicle-side control. Its 3-magnet speed sensing supports wheel movement detection, while the high-torque positioning is suitable for rental platforms that require stronger rear-wheel anti-tamper protection.
- Rental Platform Rear-Wheel Security: Designed for shared and rental e-bike platforms using rear disc brake layouts.
- DSS1736 Reference Model: Uses the high-torque smart disc brake lock direction for stronger anti-tamper protection.
- Concealed Rear Installation: Mounts around the rear left dropout and disc brake area with rear dropout matching required.
- 6-Bolt Disc Brake Interface: Supports disc brake lock matching while brake parts are not included.
- 3-Magnet Speed Sensing: Supports vehicle-side wheel movement detection for smarter lock control logic.
- Smart Vehicle-Side Control: Works with main controller, IoT or battery-side systems through source-listed interfaces.
- IPX7 Waterproof Protection: Supports outdoor rental e-bike operation and wet environments.
- OEM Matching Required: Rear dropout structure, disc brake layout and mounting clearance should be confirmed before sampling.
| Parameter | Specification |
|---|---|
| Product Name | High-Torque Smart Disc Brake Lock |
| Model | DSS1736 |
| Product Category | Disc Brake Lock |
| SKU Positioning | High-Torque Concealed Disc Brake Lock For Shared E-Bike Fleets |
| Voltage | 5V DC / 48V DC |
| Communication | UART / RS485 / CAN |
| Power Source | Main Controller / IoT / Battery |
| Electronic Protection Speed | Defined According To Customer Requirements |
| Speed Sensing Solution | 3 Magnets Per Ring, Evenly Distributed |
| Torque Resistance | >=300 N.m |
| Mechanical Safety Locking Speed | None |
| Spoke Hole | Not Including Hub |
| Product O.L.D. | Not Including Hub |
| Axle Hole Size | No Axle Hole Reserved |
| Hub Axle | Not Including Axle |
| Main Axle Load Strength | None |
| Brake Parts | Brake Parts Not Included |
| Brake Interface | 6-Bolt Disc Brake Interface |
| Operating Temperature | -20℃ To 65℃ |
| Waterproof Rating | IPX7 |
| High Temperature Storage | 80℃ ± 2℃ For 48 Hours |
| Low Temperature Storage | -30℃ ± 2℃ For 48 Hours |
| High Temperature And Humidity | 65℃, 95%RH, 48 Hours |
| Salt Spray Test | 72 Hours, Neutral |
| Mounting Position | Rear Left Dropout And Disc Brake Area, Rear Dropout Matching Required |
| Certification | RoHS / REACH To Be Confirmed Against Final Compliance Documents |
DSS1736 performs lock and unlock actions through vehicle-side electronic control while matching the rear dropout and disc brake area. This allows the rear wheel security function to be integrated into the rental e-bike platform instead of being added as a separate exposed accessory.
The high-torque positioning is the main security value for rental platforms. When matched with the disc brake layout and controller strategy, DSS1736 can support stronger rear-wheel anti-tamper protection for shared vehicles.
For OEM teams, final matching should be based on rear dropout structure, brake interface, mounting clearance, speed sensing logic, voltage and communication protocol. The lock does not include hub, axle or brake disc parts.
DSS1736 is suitable for rental e-bike platforms, shared e-bike fleets, rear-wheel disc brake e-bikes and OEM mobility vehicles requiring concealed smart disc brake locking.
It is especially useful for rental platforms where rear-wheel security, smart control, speed sensing and stronger anti-tamper positioning are important selection factors.
Before sampling or production, confirm rear dropout structure, disc brake layout, mounting clearance, 6-bolt disc interface, brake parts matching, speed sensing logic, voltage, communication protocol and waterproof requirement.
Q: What is the main application focus of this product page?
A: It focuses on smart rear disc locking for rental e-bike platform rear-wheel security.
Q: Which reference model is used?
A: The page references DSS1736 in the Disc Brake Lock series.
Q: Where is DSS1736 installed?
A: It is installed around the rear left dropout and disc brake area, with rear dropout matching required.
Q: Does it include brake parts or hub parts?
A: No. The reference parameters list brake parts, hub and axle as not included.
Q: What communication interfaces are supported?
A: The reference parameters list UART, RS485 and CAN communication.
Q: What should be confirmed before installation?
A: Confirm rear dropout structure, disc brake layout, mounting clearance, voltage, protocol and speed sensing logic.
